Stain a Wall Mural
Portrayal a mural can prove an animating behaviour to decorate a time and de facto add a sure "je ne sais quoi" to an otherwise bland case. Once you've transfered the base to the wall - using an overhead projector, a grid or freehand picture - remainder is cinch.
Instructions
Using an Overhead Projector to Transfer the Mural Design
1. Receive a constitution that you'd passion to tint on your wall. The draft can be one you've pinched yourself or one you've fashion on a greeting card, in a colouring textbook or from another source.
12. Cut each image in the design out of the butcher paper with scissors, beginning with the largest.13.
Cook a black-and-white photocopy of the double. Adoption the record apparatus to enlarge the equivalent to a proportions at which you can easily observe all the details.
4. Create a black-and-white transparency of your design. Ask the clerk at the copy store to help you.
5. Place the transparency on an overhead projector.
6. Turn the projector on and project the design onto the desired wall area.
7. Move the projector closer to or farther from the wall until the design is positioned correctly and is the desired size.
8. Mark the position of the projector on the floor with masking tape in case you need to move the projector before you've finished transferring the design.
9. Outline the design on the wall carefully with pencil.
Using a Grid to Transfer the Mural Design
10. Select and prepare your mural design, following steps 1 through 3 above.
11. Draw a grid over the photocopy of your design and enlarge it onto a piece of butcher paper (see "Enlarge a Drawing Using a Grid," under Related eHows).
2. Constitute a colour compose of the copy you've selected to operate as a reference when you're portray.3.
Use masking tape to fasten the cut paper images to the wall in the desired location.
14. Trace around each paper image carefully with a pencil.
15. Cut out any shapes that are inside the large paper images: a butterfly's spots or windows on a bus, for example.
16. Tape these smaller shapes in the appropriate locations inside the larger outlines.
17.Trace around the smaller shapes with a pencil.
18. Sketch in additional details, referring to the photocopy of your design.
Painting the Mural Design
19. Select acrylic paint colors for your mural by referring to the color copy of your design.
20. Pour each paint color into a plastic container.
21. Use a wide, flat paintbrush to paint in the large areas of your design first.
22. Blend and shade colors by painting one color on top of another before the bottom color has had a chance to dry.
23. Use a round paintbrush to add details and outline images.
