Wood clamps direct the frame in shape while the glue cures.
Forging your own picture frames Testament save you lots of wealth on framing, and Testament allow you the bent to customize extent and moulding. You can conceive your own frames using picture frame moulding, builder's moulding or lumber to devise your own singular style. Once you compass chosen and intersect your wood, you must glue the pieces well-balanced and clamp them to prevent shifting and to insure commendable adhesion. Clamping the frame is of utmost caliber and must be done properly to lock up that your frame is straight and able.
Instructions
1. Measure the canvas and cut the lumber or molding to size. Cut each of the corners at a 45-degree angle. Use sandpaper to smooth the cuts so the surfaces fit flush against each other. Smear both sides with wood glue.
Wipe off excess glue. Leave the frame clamped until the glue has cured.
3. Slowly tighten the screws until the corner of the frame is tightly clamped between the jaws. Repeat for the other three corners.2. Loosen the screws on the wood clamps until the jaws are open wide enough to fit over the corner of the frame. Place a wooden shim on the side of each corner joint. This will prevent the clamps from leaving marks on the wood.
