A burnished bulb is a cheap baggage for studio account by itself.
Although photography and movie are two completely differential mediums of living agility Craft, they both handwriting consonant techniques to accomplish decided deadline results. Studio lighting can drastically quarters the double o and shading of your photograph or video, nevertheless as well yet or as well immature of this crucial item can eminently hinder the essence of your finished product. Practice a Tinplate can assembly with a reflective surface to cooperate locate the vein for your project. Covering your Tinplate can with colored film offers a antithetic perspective in the studio.
Instructions
Tin Can
1. Drill a gap in the backside of the Tinplate can broad Sufficiently to thread the ablaze bulb meeting. A Tinplate can offers a shaded appearance when the flashing bulb is in end, companion to a light Screen or collateral arrangement.
2. Twist a aficionado to the the stop of the bright bulb meeting with pliers until it fits securely into the gap of the can. The extremity that holds the lucent bulb should be inside the Tinplate can.
3. Bend the hangar meeting sorrounding a block of wood or relatively-shaped object. The hangar should form a three-sided square to hold the tin can light at an appropriate level for studio work.
4. Drill holes on each side of the tin can to hold the hangar assembly arms to the outside of this object. Screw in the necessary screws so that the hangar assembly fits snug against the frame of the tin can.
5. Strip each of the connecting wires until about 3/4 to 1 inch of copper wire is exposed. Attach wire nuts to each of the newly-exposed wires to hold these pieces together. Wrap electrical tape around each of the wire nuts once they have been attached.
6. Attach the power supply socket to the end of the light bulb assembly kit you previously attached to the tin can. Check that the power plug is assembled correctly if the cable did not come with one already put together.
7. Screw in an appropriately rated bulb that is made for the specific assembly kit you used. Turn on this light bulb to ensure everything is working.
Colored Lights
8. Cut pieces of colored film into circular shapes that are larger than the tin can or related object you are using with the light bulb. Colored light bulbs can be expensive and limit you to one color while replacing color film strips is cheap and interchangeable.
9. Place the colored film strip over the opening of the light bulb fixture until all has been covered. Fold the excess film flaps over the sides of the light bulb fixture.
10. Tape the sides to secure the colored film to the light fixture. Do not use an adhesive such as glue because you want to be able to easily change out these colored films. A rubber band also works well with holding the film to the fixture.
12. Cut out several pieces of film so that you can always have a few choices to quickly choose from when using your studio light.
11. Turn your light on to test out the quality of the film on the light bulb. If you are unsatisfied with the color, change the film or add another layer.
