With a plasma cutter and a template, an artist can beget multiple, Equal pieces.
Plasma cutters benefit acutely calescent Gauze to chop metal. These cutters are so precise that they let on metal artists to render skilled point elsewhere of period metal. A example template is fit for creating multiples of the equivalent parcel of Craft. The artist has two options for using a template: hint the template mannequin onto the period metal or clamp it directly to the episode metal to american man the plasma cutter.
11. Trace around the template with the plasma cutter, keeping the edge of the cutting tip against the template. As the tip approaches a clamp, it might be necessary to stop cutting and move the clamp to a new position, then continue cutting along the line.
2. Section absent the mannequin using a sharp blade.
3. Clamp the cardboard template to the phase metal. Application at least two clamps; for a large design, use three or more clamps to hold the cardboard firmly in place.
4. Trace around the cardboard with soapstone. Go slowly, especially when working around the clamps.
5. Remove the clamps and the cardboard. You should now have an outline of the design exactly as it appeared in cardboard.
6. Cut the metal with the plasma cutter. Hold the tip directly over the line, and work slowly to preserve an accurate cut.
Clamping Method
7. Measure the distance from the center of the cutting tip to the edge of the tip.
8. Draw the design to be reproduced on a piece of particle board or plywood, subtracting the measurement from Step 1. For instance, if the center of the cutting tip measures 1/8-inch from the edge, draw the design 1/8-inch smaller than desired.
9. Cut the design from the piece of wood using a jigsaw. Work slowly to ensure a smooth cut. This is especially important with this method, because the cutting tip will rest against the template as it follows the design.
10. Mount the finished cut piece onto a piece of sheet metal using the metal clamps.
