You annex a digit of choices when it comes to gluing a guitar neck.
Also, it will mar a lacquer finish, requiring a finish repair that isn't needed with hide glue."
Success
The hide glue was a success. After setting overnight, the crack was "nearly invisible," Earlewine said.The Right Glue for the Job
Dan Earlewine was once inclined a Martin D-35 acoustic guitar with a neck snapped almost fini, starting at the fan and extending nearly to the moment fret. After considering the alternatives, he chose a traditional solid bury glue dissolved in fiery aqua, for these reasons: "Hide glue has a quite low viscosity, so it can penetrate deeply into a crack. Hide glue cleans up easily with imbue, still after it's dry." He adds that the glue's compel is corresponding to epoxy, admitted for its rock-hard bonds.
Modern Glue Options
Earlewine as well explained why he didn't advantage other, another recent glues, accustomed the field of the neck damage: "Epoxy would be hard To cleanse up in this situation, and most epoxies aren't thin enough to penetrate deeply into the recesses of this crack. Titebond is strong and cleans up easily, but it's rather thick and wouldn't penetrate as deeply as hot hide glue," he said. "Superglue works too fast for this job.A great glue must be stronger than the wood it binds, and it must be left to place for the required margin of date and cured appropriately. There are a cipher of choices of glues, both traditional and voguish. Dan Erlewine, a luthier, considers this in the Stewart-Macdonald Commerce Secrets newsletter.
He added this tip: "Work fast. Hot hide glue sets rapidly. If the squeeze-out is like sticky tapioca or gelatin, the glue has set. If you haven't finished clamping by that time, you should have. Practice with a dry run before using the glue."
