An Italian spiral glass dip pen is a handcrafted, old-fashioned writing instrument that contains a pointy objective (nib), which you dip into an ink jar and author with.Instructions
1. Settle on a team of rubber gloves to protect your hands from any sharp edges of the Italian spiral glass dip pen. Grasp the broken pieces under running H2O to remove any existing particles and then let the parts dry on a towel.
The colours and spiral patterns of these pieces vary abundantly, creation them highly sought after. Whether you gain the Mishap of dropping your glass pen and breaking it, you hog the competence to allot it using a earmarked altruistic of adhesive notorious as epoxy glue for glass. Utilize the glue, along with a infrequent household items, to repair your treasured plenty.
2. Clinch the broken pen parts together to beam where the spiral runs along the glass. This preparation ensures that you glue the pen along the spiral and cause not accidentally interrupt the movement.
3. Squeeze the two parts of the epoxy glue on a paper plate and homogenize the solutions well-balanced with a wooden Art stick. The magnitude of glue solitary needs to be approximately the amount of a dime.
4. Convene some of the glue on the end of the stick and gently rub it over one of the broken ends of the pen. Try not to let the glue run over the side of the pen, but if it does, rub the excess off with a cotton swab dipped in alcohol.
5. Position the two parts of the pen together so that it follows the spiral pattern you identified in the earlier step. Hold the parts together as long as the epoxy glue instructions specify and then place your pen in a pen holder or other container that allows the piece to dry (cure) in an upright position.
