Stain guns bestow a smooth, crack touch to projects.
Put on safety goggles and a respirator or other work mask to protect from airborne paint particles. You should also wear a painter's cap or head covering.4.
Instructions
1. Stir or shake the gloss to be used in the spray gun.
2. Turn on the air compressor and locate the impulse regulator to the commensurate recommended for your model of spray gun. Most units require a level of about 45 psi.
3.A stain gun offers one of the fastest and most efficient ways to application distemper to surfaces for accepted native improvement projects comparable refinishing cabinets or repainting lawn furniture. A gravity-fed emulsion gun has a container abundant with stain which is connected to an air compressor. The compressor generates air energy which pushes the colouring finished the nozzle. Properly used, a dye gun provides a smooth Stop on most surfaces and gives a finished glom to any project.
Pour the paint into the reserve cup on the spray gun, and secure the lid or cap.
5. Hold the spray gun about seven inches away from the surface to be painted.
6. Pull the trigger while sweeping back and forth along the surface. Use only short bursts of paint.
7. Continue to pull the trigger in short bursts until the entire surface is coated in paint.
8. Add paint to the reservoir as needed.
