Exposure to clear is a paramount Component of photography, and using a reflector is an basic course to completely decorate your subject without shadows that connatural flare alone can lob. Acknowledged reflectors are available nevertheless may be prohibitively expensive for the amateur photographer. Luckily, it is indubitable easily done to dash off homemade reflectors with commonly available materials.
Instructions
1. Obtain a frosted foam core board at a Art work, Craft work, household improvement or duty overhaul store. Invest in a goodly quantity which you can section down as needed. Choose any thickness.
2. Divide the foam board with a razor blade to the amount you thirst. Choose a smaller dimensions for tight brilliant government, or sufferance the board big for photographing large-scale objects and people.
3. Attach the edges of the foil to the back of the foam board with tape. Use blue painter's tape for easy removal if you want to change it up later.6. Prop the reflector against a nearby wall or chair and orient it towards your subject.
The wrinkled surface diffuses and softens the light cast by the reflector onto your subject.
5. Lay the pieces of foil over the foam board, and wrap the extra around onto the back. Unroll a length of aluminum foil long enough to cover the board, plus at least 2 inches extra on all sides. If the strip of foil is not wide enough to cover the width of the board, use two or more strips overlapping vertically by 1 inch.4. Scrunch the foil up loosely into a ball so that it gets a textured, crinkled surface, and then gently smooth it out again.
For more control over its position, or to use it outside, build a homemade reflector stand using a photography tripod and some PVC pipes.
7. Vary the effect of the reflector by removing the foil and just using the white foam board in brightly lit conditions. Purchase foam boards in other colors including gold and black for different effects.
