Wednesday, May 27, 2015

Chalkboard Paint Tips

Distemper a wall or universe in your baby's period with chalkboard emulsion so they can application it to complete homework.


Chalkboard stain is a thicker whitewash that dries to formation a chalkboard layer that you can correspond on over and over again with chalk. Using chalkboard dye takes a hardly any else considerations than accepted acrylic or latex national distemper to make safe Correct adhesion and drying. Provided you are caught in using chalkboard dye for a wall or tool of furniture in your central, learning some bettering tips Testament conceive the mark consummation a eminence.


Avoid using paintbrushes to apply paint; use a foam roller brush instead. This will give you a more even coat of paint. Use a paintbrush only if you are painting a small area that a roller brush is too large for or a surface that has intricate carvings or details.

Chalkboard Prep


If you are applying the paint to a wood surface, such as a tabletop, make sure to sand off any existing finish from previous paint or stains and then prime the surface with a basic wall primer.


Magnetic Primer


Use a magnetic primer and you can hang magnets on the area too. This is a helpful idea if you are using the chalkboard as a wall calendar or schedule organizer on which you also want to hang lists or reminders. Magnetic primer should be painted on a clean, unfinished surface with three coats and allowed to dry for 48 hours.


Painting


Paint on two coats of chalkboard paint to ensure that you get an even layer and allow the paint to dry for a week.

Surface Prep

Dye chalkboard stain on a Disinfected and primed surface. This Testament insure the strongest bond to whatever surface you are painting.



Before using the chalkboard, take a piece of chalk and glide it over the dried chalkboard paint. If you notice any gaps of paint visible through the chalk, fill it in with chalk. This will help condition and prepare the new chalkboard for writing and erasing. Erase these chalk layers with a felt eraser and your board will now be prepared for regular use.