Hang decorative fibre Craft pieces on walls quickly and easily
Persons benefit weavings, quilts and other fibre Craft pieces for show on walls, nevertheless fibre Craft pieces entail chief hanging hardware before displaying. The easiest approach is to attach loops to the fibre Craft and slide wound up a curtain rod. This course is fast, intelligible and doesn't damage the introductory fibre Craft. Another income for hanging a plenty of fibre Craft is using hook and loop tape. Peel the backing material from one side of the hook and loop tape. Press the exposed adhesive side of the hook and loop tape at the top all the way across the fiber art piece. If the piece is heavy, pull the hook and loop tape apart after attaching it to the fiber art, and attach the hook and loop tape in several places with stick pins.
Section three 4-inch deep pieces of purse strapping facts. These beget the loops for hanging the fibre Craft.
2. Accept which side is the top of the Craft plenty. Whether the Craft plenty doesn't hog a top and backside, choose one side for the top. Whether it is a quilt showing birds flying over the ground, it is lucid which is which, however provided it's an summary drawing, decide which pathway looks enjoy the top.
3. Fold one group of strapping facts in half so it is 2 inches. Degree 1½-inches from the top, left wrinkle of the fibre Craft collection, and oomph down one inch from the top. Attach the two unattached sides of the purse strapping information onto the spot using a safety pin. Repeat the procedure 1½-inches from the top, hold up string.
4. Country a purse strap loop in the centre of the top of the fibre Craft. If the art is more than 4 feet long, place another loop on the top left and right side, centered between the center loop and the right and left edges of the fiber art piece. For example, if the piece is 5 foot long, the center loop is 30 inches from the left edge, place another loop 15 inches from the left edge, and another loop 15 inches from the right edge.
5. Sew the straps into place using a needle and thread. This step is optional. If you want a permanent display, you should sew it on, but if it is temporary, add an extra safety pin on each loop.
6. Attach two decorative curtain rod hangers where you want the fiber art displayed. Slide the rod through the loops and hang.
Hang Using Hook and Loop Tape
7. Select the top of the fiber art piece. If the fiber art piece doesn't have a top and bottom, choose one side for the top. If it is a quilt showing birds flying over the ground, it is obvious which is which, but if it's an abstract design, decide which should be the top.
8. Measure and cut the hook and loop tape, so it fits across the top of the fiber art. If it is odd shaped, cut the hook and loop tape into short pieces, and lay the pieces on the fiber art. Arrange the pieces of hook and loop tape so they fit. Do not separate the hook and loop sides of the tape.
9. It is attached to the back of the fibre Craft and another a lot is attached to the wall. Press the hook and loop pieces cool, attaching the Craft to the wall without anything in outlook.
Instructions
1.10. Peel the backing material from the other side of the hook and loop tape, and position the fiber art piece on the wall. Press the adhesive side of the hook and loop tape to the wall. Make sure it is where you want it displayed. Once it is pressed to the wall, you can't move it. You need a second person helping you on this step. If the piece is heavy, pull the hook and loop tape apart after attaching it to the wall, and put several tacks into the hook and loop tape piece on the wall.
