Tape is handy on the contrary can green light undesirable residue latest.
The sticky layer of adhesive on tape is what adheres it to the surface it is applied to. The adhesive layer is Dried apricot into a semi-solid gummy consistency. Some of this gummy adhesive recurrently separates when you remove the tape, leaving a residue at the end. There are a couple of ways to remove this residue; the income you choose Testament depend on if the surface data is porous or nonporous.
7. Scrape away the softened adhesive with the razor blade.8.
Scrape as even residue off of the surface as you can with a razor blade. Work the blade under the edge of the residue and slowly chip away at the rest.
2. Dip a cotton swab into olive oil and rub it over the residue to soften the remaining adhesive.
3. Scrape the softened adhesive with the razor blade to remove it completely.
4. Buff the spot with a clean cotton cloth to pick up any remaining traces of adhesive and soak up the olive oil.
Hard Porous Surfaces
5. Scrape away the bulk of the adhesive with a razor blade by working it under the edge of the adhesive and chipping away at the rest.
6. Dip a cotton swab in rubbing alcohol and rub it over the remaining adhesive to soften it.
Instructions
Nonporous Surfaces
1.Buff and dry the area with a clean cotton cloth.
Clothing
9. Scrape the bulk of the residue from the fabric with a razor blade. Be careful not to slice through the fabric.
10. Dip a clean cloth into dry cleaning solvent and dab it over the adhesive.
11. Continue dabbing with the cloth to soak up the adhesive. Reapply dry cleaning solvent this way until the adhesive is completely absorbed.
12. Launder the clothing as usual.
Carpet
13. Scrape the adhesive from the carpet as much as possible with a razor blade.
14. Sponge dry cleaning solvent onto the adhesive with a clean cotton cloth. Apply pressure to blot the area until the solvent and some of the adhesive is absorbed.
15. Pour one tablespoon of dish soap, one tablespoon of white distilled vinegar and two cups of warm water into a bucket.
16. Blot the adhesive with the detergent solution using a sponge.
17.Rinse the sponge with clean water and blot it over the carpet to rinse the detergent and vinegar away.
