A conception colour board is a fat hang-up to deal in all of the details in a local remodeling project organised. It can relieve the homeowner flash how all of the selected finishes for a interval Testament donkeywork in sync and makes client presentations deeper polished. Although they can proceeds age, disposal and a abundance of patience, colour boards are relatively inconsiderable to assign well-organized. The steps listed here Testament hire you ended the development of creating an impressive board.
Instructions
Assembly
1. Assemble all of the supplies on a Disinfected, exertion surface. Receive a surface where the board can sit overnight To admit the adhesive to dry completely.
2. Call the X-Acto cutlass to chop the foam board for the Ending presentation board to the desired amount (normally 24 inches in heighth x 36 inches in diameter). Apartment the self-healing cutting mat underneath and cause the metal ruler as a straight border to dart the X-Acto along. Amass fingers safely on the ruler and away of path of knife. Cut slowly through the foam board repeatedly using smooth even strokes. Do not try to chop all the way through the board in one stroke as this will cause the edges to become jagged. Replace X-Acto blades frequently to ensure clean cuts.
3.7. Attach samples to the board. Use rubber cement for raised items on foam board (follow directions on package), silicone for heavy items and glue stick for very light items. Use ruler or T square to ensure items are straight.8.
Print out labels (if you choose to use them) to identify each sample, like: "backsplash tile."
6. Determine the layout of board by laying all items out on the surface before gluing them down. Leave at least a one inch of empty space along ALL edges of the color board. Leave some empty space here and there in between items so the board is not completely covered. Mix the placement of raised items with items attached directly to the board. If possible, attach samples of cabinet hardware or tassels to add visual impact.
Cut smaller squares or rectangles of foam board for mounting fabric samples, photos and other items that will be raised. Raising some items adds dimension to the board and makes the final presentation more visually interesting.4. Glue selected samples to the smaller pieces of foam board. Use glue stick for light weight fabrics, photos and paint samples. Use rubber cement for heavy weight fabrics, some flooring and countertop materials. Clean up any frayed fabric edges by dabbing a little glue stick on your finger and then smooth it along the edges until they lay flat.5.
Attach labels if using them.
9. Set board aside to dry completely overnight, laying flat and undisturbed.
10. Remove any stray bits of rubber cement and other adhesives by using the rubber pick-up square to wipe them away.
