Underwater video recording requires the Correct Accoutrement
If there are none, remove the housing from the water and, drying your hands and the housing exterior, check the interior for any evidence of water. If the housing is leaking, recheck the O-rings for cuts or nicks, replacing any O-rings that are damaged. Repeat the wet test. If your housing still isn't dry afterward, contact your housing's manufacturer for proper customer support. Considerate the basics of underwater video video can facilitate you coming the effort correct.
Equipment
The most basic plenty of Accoutrement you Testament occasion is a video camera. Now of the electrical problems posed by much slender amounts of damp, purchasing a waterproof video cameras housing to protect your video camera is compelling. Waterproof video camera housings can be purchased at many shops specializing in photography gear, or from a heterogeneity of Internet retail stores, some of which specialize especially in underwater video. Cause confident you shop for the housing compatible with your video camera. As well, evaluation the housing specifications so that you are aware of what depths you can safely bring your camera to.
You Testament besides demand to obtain further O-rings for Correct housing maintenence. Any Press-stud or movable quota on your camera housing Testament hurting for at least one O-ring; replacing worn O-rings is cardinal to control your camera dry. Correct O-ring prolongation includes using lubrication every month or so with O-ring grease; disassemble the O-rings every rare months to wipe off any large particles that may cause malfunctions.
Wet Test
Giving your underwater camera housing a proper wet test before use can help spot problems in your housing before ruining your camera during use. After attaching all necessary O-rings and prepping your housing, dunk the housing underneath water. Again, make sure your camera is not in the housing when you do this. Let the housing sit underwater for a few moments and look for bubbles coming from the housing meanwhile.Whether you adore scuba diving or downreaching sea adventures, you may appetite to probe the possibilities of underwater video tape. Being underwater offers a collection of vigorous colours and elegant scenes that can make impressive recordings, all the more in the hands of an amateur. Professionally, underwater video disc can add to the change of your portfolio; owning the Correct Accoutrement can create you a else appealing choice for clients.
Port Connections and Oxidation
Many underwater camera housings include port connections that keep electricity constantly flowing to your monitor or lights. Although water will not short these connections out, contact with saltwater will cause the metallic finish to oxidize, inhibiting the proper flow of electricity to your camera. If you are having electricity current problems (i.e. flickering camera lights), check the port connections on your housing's bulkhead. If there is any green film, you've found evidence of saltwater oxidation. To remove from the male metal port connections, lightly sand away the green film with fine grit sandpaper. Then take a metal pipe cleaner to the female connection, clearing away any grit from the inside. Use some form of compressed air to blast air through the female connection afterward.
Lighting
Proper lighting is important to capture video underwater, where there is much less light than on land. Your housing should come included with a fill light that shoots light straight at your target. If you don't have one, purchase a key light to attach to your housing. Your fill light should be arranged so that it throws light at your subject from a 45-degree angle. Without the key light, your subject will be shadowed so that it is barely visible on video. Aiming both the fill and key light properly at a subject will allow you to capture clear, colorful video.
