Bold colours can add unmistakable emotions to your motorcar.
Instantly I posses been seeing for in toto a while that portrayal a van interior is a graceful everyday petition. The motivation for the colour pocket money can scope from restoration to retain a automobile's reward to building that delusion present van. What ever the judgment, it has to be done properly with patience and chronology to insure that the Stop Testament endure you senescence and Testament gun absolute with a level chore. I compass as well seen a quantity of tutorials that tolerance elsewhere exceeding details in the preparation that can be the antithesis between a incredible stain billet that adds style and attribute to your vehicle and a fading and cheap looking distemper connection with chip marks In all places. So I keep if an accurate design to delineation your vehivle interior. Cite that preparation is gloss so scrutinize carefully and joyful representation.
Instructions
1. Apprehend what you hankering! know what color scheme, pattern and finish. If you are investing the time and effort to paint your car be sure you have a rough idea how it's going to look.
2. Remove all the panels, plastic components, pieces, knobs. Everything you want to paint will be easier to prep and paint once it is removed from the car. If it cannot be removed and has to be painted while in the car, use painters tape and plastic bags to seal off all the areas you don't want to paint. If the panels you remove are attached to wires and other electrical components make sure the battery is disconnected.
3. This will remove all oils, grease, armor all, dust and dirt from the surface that will damage the finish.4. Apply the prep gel onto the pieces and with the scouring pad rough up the surface of the panels. This will promote better adhesion between the primer and the surface of the panels and plastic components.
Now it's time for preparation, this is the most time consuming part but it is also the most important. Correct preparation is the difference between a quality paint job and one that is fading and chipping.Get the pieces and with some lacquer thinner clean and scrub all the pieces you want to paint.
Thus preventing any unnecessary peeling.
5. Next is the primer, whether you are using a spray gun or a rattle can, spray the surface in rows. For instance spray from left to right, or up to down. Never spray in circles, this will leave some areas with too much primer and other areas with not enough.
6. Once the primer is dry it's ready for paint. Make sure you get paint designed for car interiors and that are designed to be heat resistant. Once again whether with a spray gun or rattle can, spray in a back and forth motion. the paint will be dry to touch in about 5 minutes and dry to handle in 15 minutes. After about 5-7 minutes of the first coat spray another coat. In all have no less than 4 color coats, this will ensure that the paint will last a while.
7. The paint with be fully dry in 48 to 72 hours. Once it's dry spray a coat of clear coat to add UV resistance in the paint on the panels. Let the clear coat dry and reinstall all the panels back into the car.
