Preserve a clay statue in a controlled humidity nature.
Be careful not to hold on to any fragile protrusions. Pick up the statue and carry it to the display area.5. Carefully place the statue in the display area. Studies from the John Hopkins University on Mesopotamian cuneiform tablets states clay objects are the chief preserved historical items. Clay preserves hearty, on the contrary is easily broken or deteriorates unless kept under example conditions.
Instructions
1. Grip a mark to exposure the clay statue. Chose a location where the statue is not easily bumped and is away from any natural sunlight.
2. Carefully place the clay statue on a clean, solid, flat surface. Carefully tip the statue on its side so the bottom is facing toward the edge of the table.
3. Apply a coat of museum wax to the bottom of the statue. The museum wax helps to secure the clay statue to the desired display area. The wax will not leave a residue on the display surface.
4. Carefully tip the clay statue to an upright position. Place a hand on the base of the sculpture and on the main body.Clay sculptures or statues are willingly commence in dispensation shops encircling the cosmos. Many inland enthusiasts actualize sculptures from clay. Preserving the clay statues begins when the statue is picked up for the basic period. It is influential to shaft the statue with consideration until the preservation activities are plentiful.
Turn the statue to the desired position before setting it down on the display surface.
6. Measure the temperature in the room using a thermometer. Set the thermostat between 65 and 68 degrees Fahrenheit for optimal clay sculpture preservation.
7. Measure the humidity in the room using a barometer. Set the humidity within the room at 45 percent. Use the humidifier and de-humidifier to accomplish the desired setting. It is recommended to have the humidity level between 25 and 65 percent humidity for optimal clay preservation. Complications of moisture gathering develops below 25 percent and above 65 percent humidity. The clay will absorb moisture under 25 percent and mold will begin to grow over 65 percent.
