Appropriateness a mould with Fimo to make several items of the corresponding shape.
Fimo is a Trade-mark of polymer clay commonly used in forging jewellery and sculpture. It is cured in a accepted household oven. To assemble replicated shapes with polymer clay, it is easier to advantage a mould. Store the mold in an airtight container or bag to prevent it from drying out.
1. Mix equal parts of the two-part silicone putty in your hands until blended. The amount you mix depends on the object's size. Mix enough putty to surround the object with about a 1/4- to 1/2-inch edge. A 1-inch-diameter object, For instance, would need about a 1-inch ball of each part of the two-part silicone putty.
2. Roll the putty into a ball and lay it on the work surface. Work quickly before the putty sets.
3. Press the object, right side down, into the putty until the putty meets the bottom edge of the object.
4. Let the putty set with the object in it for 10 minutes or until solid with a smooth, rubbery texture. Time may vary depending on the mold size.
5. Pull the object from the mold. This allows the artist to accomplish distinct similar shapes while saving eternity and creation. To construct a mould for Fimo, all that is needed is a iron oppose, such as a charm, cameo or Press-stud, and silicone putty compound. It is hurried and apparent to constitute Fimo pieces that look just like the original object.
