Come across crystals a polymer clay backing without losing flash.
Tip the clay piece on its side to drop the crystal out (assist with a pin, if necessary), leaving an impression in the shape of the crystal.4. Repeat step 4 with all other crystals you want to place in the sculpture.5.
Instructions
1. Soften the Fimo by working it in your hands, using both the warmness of your hands and strength to soften it until it's smooth and pliable. Provided exigent, rub a miniature extent of mineral oil on your fingers to cooperation soften the clay provided it's besides crumbly (Fimo is a harder formula when compared to other brands of polymer clay).
2. Fabricate the sculpture or shape you appetite the crystals fix in; constitute it as full as viable so that also manipulation of the clay won't disrupt the placement of the stones. Press the areas where you require to district the stones so that they're relatively Apartment lodgings.
3. Beget impressions for the crystals in the soft clay. Clout the crystal just above the portion of the clay sculpture where you want it To measure the positioning before pressing it slowly into place. Press the crystal down until it's submerged in clay to the depth you want, wiggling the stone very slightly so that the impression will be a little larger than the crystal.Fimo&Commerce; is a relevant Trade-mark of polymer Art clay, designed to be hardened in a conventional oven. Universal for convenience in bantam models and jewellery pieces, many Art makers adore to subsume objects, such as rhinestones or crystals, into their works of Craft. Though it's intelligible to press a crystal into clay and bake it (thanks to a low-temp conventional oven won't damage glass or semi-precious stones), getting the crystals to double o their blessing requires a uncommon fresh steps for positioning and flash.
Clean the crystals with a cotton swab soaked in a solution of water with a little dish soap; this will remove oil smudges from your hands and from the clay. Set aside.
6. Bake the clay according to the manufacturer's instructions. Let cool.
7. Paint the insides of the crystal impressions using silver paint and the detail brush; this will provide a backing for the crystals to shine and keep them from disappearing into the sculpture.
8. Glue the crystals into the impressions. Use the toothpick to place a tiny drop of clear glue into the center of each impressing, then set the crystal in place using the needle-nosed pliers. Let dry.
