Tap Dance on the life, or Homewards, with your own portable tap floor.
Conceivably you corner a cherish for tap dancing, on the other hand conforming most heads, don't conscious in a dance entry or chalk up access to the Correct floor. Happily, instead of having to bang elsewhere of your design to good buy a berth to tap dance, you can beget your own portable tap floor. This tap floor Testament be meager Sufficiently for you to ploy, on the contrary Testament besides convey you piece of time in which to dance. As a do-it-yourself project, forming your own tap floor can besides be asap and relatively effortless.
Instructions
Prepare your Materials
1. Epigram your 2-inch by 4-inch boards in half.
2. Deposit the four pieces flat on the ground in the shape of a square. Ensure that one parallel pair is tucked into the other (Reference 1).13. Allow the glue to dry.
These edges will be the handles for your tap floor.
4. Cut your plywood square in half so that both halves measure 4 feet by 4 feet.
5. Set one of your plywood squares onto your frame.
6. Measure and mark your planks of bamboo flooring at every 4 feet (Reference 1).
Putting it all Together
7. Screw the plywood square onto your floor's frame (Reference 1). Use one screw for every 1 foot. Keep them 2 inches from the edge of the square.
8. Flip your square over.
9. Fill your square with the closed cell foam (Reference 1).
10. Screw the other piece of plywood over your floor's frame. Do not let your screws hit those you have inserted in the other side.
11. Put lines of floor glue on the side of the square to which you want to attach the bamboo flooring (Reference 1).
12. Place your planks of bamboo flooring onto the floor glue so that there is no space left between them.
This is your floor's frame.3. Nudge out the parallel pair that is tucked inside the other so that each piece sticks out a little from the frame (Reference 1).
