Sound activated luminous switches presentation a defended, hands-free plan to turn on a lambent.
There are many options available to relief with the no sweat assignment of turning lights on and off. One innovative road is to cause sound activated switches. This allows users to turn the lights on or off with a no sweat snap of the fingers, Applaud of the hands or a spoken Order. A common light switch manually completes an electrical line to turn a glowing on and breaks that guidebook connexion to turn the lights off. A sound activated switch uses sound waves instead of your finger to trigger the manner.
Plug your aglow source into the sound activated switch.
Hardwired Switches
4. Turn the trail breaker off for the time you are working in.2. Plug the sound activated switch into the electrical Issue.
3.
Instructions
Plug In Switches
1. Turn off your glossy source and unplug it from the electrical Issue.Verify that the faculty is off to the light source you Testament be working with by putting the switch in the "on" position.
5. Remove the insert plate of the wall mounted lucent switch whether this is what you are replacing. For ceiling mounted sound activated switches, remove the embrace and the mounting screws of the ablaze fixture you are replacing.
6. Pull the switch or ceiling mount unit outside of the box it was secured in.
7. Unscrew the terminal screws on the old light switch and clip the bare ends of the wire off. for ceiling mounted units unscrew the wire nuts on the old ceiling mounted light fixture.
8. Strip the cut wires back about 1/4 inch and attach them to the new sound activated wall-mount switch. For ceiling mounted sound activated switches, use new wire nuts to associate the existing wires to the pigtail wires on the switch.
9. Put the wall mounted switch or ceiling mounted switch into place and secure with the screws provided.
10. Turn the circuit breaker for that room back on and test the lights.
