Thursday, September 18, 2014

Build A Homemade Still

Stills are used in commercial and homely Industry of alcohol.


Stills are an apparatus that uses a heating and cooling course to seperate changeable liquids from other liquids, or solids from liquids. Stills are besides the leading Accoutrement used in the Industry of alcohol. By Hot the fermented liquid, the even separates and concentrates the alcohol in a vapour; when cooled, the resulting liquid Testament corner a gigantic percentage of alcohol. Extensive stills are used in commercial applications and there is a dedicated amount of hobbyists who constitute their own personal alcohol concluded homemade stills.


Instructions


1. Crimp the copper tubing so it can be inserted into the second hole that was drilled in the rubber stopper.7. Place the kettle on the single element, turn the element on and heat the mash to a temperature between 170 and 200 degrees Fahrenheit. The mash will create a vapor that will travel through the copper tubing, and, as it cools, will collect in the jug and drip into your final container.



Create a stand for the jug that will allow you to place the bottle or flask under the drilled hole.


4. Drill two holes into your rubber stopper. One hole needs to be small enough to securely the hold the cooking thermometer. The other hole needs to be slightly smaller than the diameter of the copper tubing.


5. Pour the mash into the kettle. Insert the stopper into the kettle's spout. Insert the cooking thermometer into the stopper.


6. Contour the copper tubing into a coil. You can manipulate any cylindrical oppose as your template to bend the copper. Copper is a especial soft metal; during the step practise certain you achieve not bend the copper so that the tube itself becomes closed or bowed. You Testament requirement to ok six to eight inches of straight conduit at both ends.2. Subsume one purpose of the copper coil into a crock. The ewer can be any size, provided that the opening is large enough for the copper piping to be inserted in. Drill a hole in the bottom of the jug to match the diameter of the copper tubing.3.