Silk Shade printing is a operation where colouring is applied using a chief stencil. The stencil Testament transfer one colour of whitewash onto an body at a future. Extra stencils are used to manipulate multiple colours to one comp. Silk was the aboriginal material used for this means, which is why it is commonly down pat as silk screening. This channels is most commonly father on synthetic material and wallpaper. The action is a tedious business that leaves a cleaner Stop that still some mechanical printers can discharge. The growth to remove silk Shade print from nylon depends on the type of nylon used.
Instructions
Hardened Nylon
Use a new bag once the print has taken up the first side of the bag. Do not flip the bag over, the paint will stain the iron. Do not press the iron directly onto the nylon.
Mop the WD-40 away vigorously with a dry towel. Scrub excess print with the WD-40 soaked towel.
3. Repeat the process again if needed to remove the remainder of the print from the nylon.
Nylon Fabric
4. Wash the fabric in cold water. Do not use hot or warm on any of the settings. As a safety precaution turn the hot water off at the tap. This will prevent the washer from using any hot water.
5. Lay the damp cloth onto an ironing board. Place a paper bag over the silk screen print. Do not use a paper bag that is lined with a shiny film.
6. Iron over the paper bag covering the entire area of the silk screen print. The print will transfer onto the paper bag.1. Spray WD-40 over the all-inclusive silk Shade print. Grant the WD-40 to pool over the silk Shade print.2. This could cause damage to the nylon fabric.
7. Repeat the process if needed.
