Restore Porsche Cookie Cutter Wheels
The "Cookie Cutter" spin was unreal by ATS for the Porsche 911 starting in 1973. It earns its label from the distinctive shape of the circle centre, which looks correlative to a cutter that would be used to practise cookies. In the next age the shove was used on Porsche 911s and 944s. Though the Cookie Cutter wheels are not as desirable as the else traditional Porsche Fuchs wheels, they are colossal looking wheels when they gaze their culminating, and restoring them is not that crucial.
5. Rinse the wheels with the high-pressure washer or a hose. Clean the wheels with mild soap and water or something like Simple Green.6.
Include the tires removed by a tire shop. This manner is optional, on the other hand it Testament be easier to restore the trundle provided they are removed.
2. Disinfected the wheels with a high-pressure hose to remove any loose debris and dirt. Disinfected the backsides too.
3. Strip the gloss on the centre of the wheels and the shiny coat on the rim of the shove, with Jasco emulsion stripper or a congruent product. Let the stripper soak in for ten or fifteen minutes or longer.
4. Sponge the whitewash off with a rag when it starts to bubble. You can as well handle steel wool to scrub the distemper off. Repeat this process until all paint and clearcoat is gone.
Instructions
1. Remove the wheels from the vehicle provided they are yet mounted.Wipe the wheels down with mineral spirits. Make sure that any surfaces that will be painted are completely free of oils and grease. This is a crucial step. The paint will only adhere further as the surface is cleaned.
7. Tape off the center of the wheel. Spray on two or three clearcoats with a spray can. Allow the clearcoat to dry for several hours if not overnight.
8. Remove the tape from the center of the wheel. Mask off the rim. Spray on a light dusting of spray paint and allow it to dry for a minute or so. Spray on three to three solid coats of paint in the color of your choosing. Cookie Cutters were painted a variety of colors from the factory and some merely had a clearcoat applied to the center.
