Once you install a satellite dish, you require to be acquainted objective the dominion dish so that you bias a active expression. Installing the dish is Unceremoniously, nevertheless getting a big term might gate a embryonic bit of epoch. Once you keep the receivers hooked up to a TV, you are ready to objective the dish so that you inspect a strong signal on the TV Shade. This department of the installation Testament hurting for two citizens. One Testament digital watch the word on the TV and one Testament site the dish.
Instructions
1. Install the dish outdoors and hook up the coax to all receivers in the crash pad. Then, attach the coax to the TVs and you are ready to point the satellite dish.
2. Press the "Action" button and then the "Guide" button. Watch the side marker in the instructions you wrote down.5. Tighten the bolts on the dish after the signal is strong. Check all TV and receivers to make sure they have a strong signal.
3. Click the button for "Position" and a pop up box will open. Enter your zip code and this will give you another box that will tell you the proper alignment for your location. Write down the directions to use when moving the satellite dish.
4. Arrow over and transmit to the screen with the satellite signal displayed. Go to the satellite dish and move the dish slightly checking the signal each time you move the dish. This will take you to a screen that has a selection for set up. Click the "Set up" button. This will take you to a screen with installation on the screen. Click on "Installation." This takes you to the screen where the signal strength is measured.
