A van pocked with rust spots doesn't corner to extreme branded with these unsightly signs of lifetime and decay. It's imaginable to successfully dish out your rust bucket a stellar gloss function by removing rust and priming your vehivle for a entire cutting edge attending and mood. Delineation your rusty automobile Testament cut a mini patience and grunt chore, however it's extended than viable to achieve this effort without an expensive Journey to the target shop.
Instructions
Remove the Rust Spots
1. Call the painter's tape to divide off the rusted parts of your van's reason, then insert the surrounding surface (at least one side of the car) to ensure dust particles and paint remain localized to the rusted area.
2. Use a metal sanding wheel, to slowly sand down the rusted area and a few inches around it right down to the metal, removing all paint and primer.
6. Use the paint sprayer to apply a coat or two of primer. Allow to dry for at least 12 hours.7.
Use the metal sander to remove the rest of the paint if you're painting your entire car.
Prime and Paint
5. Be sure each area you are repainting is properly sectioned off with painter's tape and a covering for the surrounding car area if you are repainting the once-rusted areas of your car to match already-existing paint.
3. Apply rust remover (available at most auto or hardware stores) to the sanded-down area and, if necessary, continue slowly sanding until you have a smooth surface.4.
Spray on the paint color of your choosing as many times as it takes to achieve a smooth finish. Let dry for at least a day.
8. Remove the painter's tape around the former rust spots and, using the buffer, buff the edges to achieve a clean blend with your car's original paint finish.
