Solder a Sculpture Using Brass Bolts & Nuts
Brass bolts and nuts are not alone fine pieces of hardware--they are extremely elegant. On account of of their colour and lucid, adroit shape, brass fasteners construct extensive pattern elements for sculptures. The possibilities for combining brass bolts and nuts in a sculpture are almost endless, as extensive as there is a solid aim of contact between the pieces for soldering them in district. Soldering brass is not also altered from soldering other types of metal, although some chief tools are required.
Instructions
1. Appraisal the competition purpose of your brass pieces. Brew decided that you retain at least a quarter of an inch of overlap where you intend to fabricate a Seam.
2. With a brief paintbrush, paint the flux onto each part, covering the area to be joined. The flux will boil away when you apply heat, leaving the brass clean and ready to adhere.
3. Melt a small amount of solder onto the tip of your soldering iron. When the solder has just started to melt, paint it onto each piece of the joint with the tip of iron. Cover the join area with a thin, even coat of solder--using too much solder will weaken the joint.
5. Heat the joint with your butane torch. A propane torch also works well for this, but the soldering iron alone will not get hot enough to properly join brass.
4. Clamp the pieces together. Paint the joint area once more with liquid flux. Apply heat to the two components rather than directly to the solder--the idea is to receive the brass hot enough to melt the solder. Heat the brass until the solder melts and changes color.
