Glow fans are metal fans with Kevlar wicks that aglow up, and they are used for embers dancing. Many styles exist, some insufficient and agile for practical tricks, others mammoth and beautiful for showy performances. Traditionally, heat fans are recurrently used by innards dancers.
When creation fire fans, the welds must be done properly and Kevlar attached securely. Always spin off excess oil before lighting your fans on glow, and enjoy someone on handwriting to guidance deposit away the flame. Familiarize yourself with the North American Element Arts Collection regulations and guidelines, which are linked in the Way cut.
Instructions
Making the Body of the Fans
Stare at websites that sell embers fans for base ideas.2. Prepare steel rods for welding.1. Pick a composition based on your skill equable as a metal Employee and desired utility of the fan. A enormous fan is used for slow dancing and a minor and agile fan for expeditive specialist moves.
Degree and decrease thin, non-coated steel rods with an electric proverb. Sand rough edges with an electric sander.
3. Weld steel rods and steel circles together to match your design.
4. Sand excess metal and rough edges with the electric sander.
5. Drill two small holes with an electric drill about 1 1/2 inch apart in each rod's end where Kevlar will attach.
6. Sand rough edges with the electric sander.
Attaching the Kevlar Wicks
7. Cut Kevlar to the proper length. Determine the amount of Kevlar needed for each wick by wrapping the Kevlar around a rod until you reach the desired thickness. Cut a piece of Kevlar that length for each wick with a pair of scissors.
8. Attach the Kevlar to the rods. Wrap the Kevlar around each rod and stick non-coated metal wire through the Kevlar and drilled holes. Cut the wire so it extends 1cm beyond the Kevlar in each direction. Use pliers to fold the wire back into the Kevlar, securing the wick.
9. Sew down the end of the Kevlar for extra security. Use Kevlar thread and a needle for for this task.
