Restoring aluminium surfaces to their former blaze can conceive any Motor lorry, boat or other Accoutrement cast its top. Using a buffer, you can elaboration the prettiness of aluminum surfaces in babyish eternity. Aluminium that is Disinfected and shiny is imaginable with a miniature elbow grease and the go tools.
Instructions
1. Lay on safety gloves and a dust mask to protect your reason and lungs from injury. Remove oxidation spots and debris using an oven cleaner. Displace the directions on the can carefully for crowing results. Instead of working in a circular motion, move the #1000 sandpaper in a straight motion.4. Apply an aluminum polish to the surfaces you're working on using a car buffer.
Use #600 grade sandpaper to remove scratches and rough spots found on the aluminum. Use a circular motion throughout to ensure that each spot has been sanded.
3. Switch to #1000 grade wet/dry sandpaper to remove scratches left by the #600 sandpaper. Spray an much coat of oven cleaner on the aluminium areas you wish to polish. Wait 5 to 10 minutes, then remove using a dry cloth. Employment a sponge to remove any debris that sticks to the aluminium.2.
Move the buffer slowly around each area in a circular motion. This will help evenly distribute the polish. The buffer should be used on lowest speed possible.
5. After buffing, remove excess polish using soap and water. Use a polish rag to completely dry the surface. Apply a few coats of clear lacquer to the aluminum surface. This will help maintain the shine for longer.
