Airbrush artists hog contradistinctive ways of doing 3D lettering. Some prefer to conclude it freehand, while others break ground with a stencil and intact the activity by artisan. Regardless of your adjustment, crafting airbrushed 3D lettering is not ball-buster and can be accomplished yet by a apprentice with a brief training and basic airbrush tools.
Instructions
1. Sketch your lettering on your canvas with a pencil. Alternatively, custom stencils to contrive the front face of your letters head, then practice a pencil to add the lines for the three dimensional Component. Fix upon which succession your imaginary illumination source Testament come from and trail lines extending out from your lettering in the antipodal course to produce the 3D chain reaction.
2. Attach a 0.5 mm arrow to your airbrush gun and colour your packages facing with a 0.5mm arrow. Ownership the airbrush gun between 2 and 3 inches from your canvas and steady your wrist with one hand as you apply the paint. Go over these lines in black or use the same color you used on the face of the letter, but with a darker tone. Hold the airbrush about 1 inch away from these lines as you darken them.4. Attach the 0.5 mm needle and color the three dimensional aspects of your lettering.
Apply the paint in short bursts, moving from top to bottom on your lettering. This helps you monitor the application so it doesn't streak and you keep a consistent color.3. Attach a 0.35 mm needle and go over the lines you drew to create the three dimensional elements you drew on your letters.
This area should be lighter or darker than the face of your lettering to create contrast. It can even be a different color. Apply this element with your airbrush gun between 2 and 3 inches away from the surface of your canvas, again using short strokes to control application.
