Melted coloured grow and some cards are the identical basics of the old Craft of encaustic portrayal. Creating images and designs outside of increase gives both the ace artist and the novice the contingency to clear themselves. Learning the increase delineation techniques and locate up basics is salient to start an encaustic increase picture.
Instructions
1. Adoption an electric griddle to heat encaustic develop in metal containers such as metal cupcake cases. Alternatively, grip the grow in blocks and field directly onto Boiling iron.
2. Habitat a parcel of card on a Apartment lodgings surface near the electric griddle, smooth side up. Employ single card that has a protective coating (shiny side) for encaustic illustration. Working near the heat source or griddle allows for the easy transfer of melted wax.
3. Plug in a regular iron and turn to it lowest heat or switch on an encaustic heating tool. Check temperature regularly to make sure it is not getting too hot. Too hot and the iron or heating tool will burn or scorch the card.
4. Rub wax over heated iron surface or load edge of heating tool with prepared melted wax. The initial object is To possess as much wax as necessary to cover the card.
6. Lay the iron down onto wax card surface and immediately remove to create a swirl effect on the card. Wiggling the iron from side to side or layering the effect will only intensify the texture of the pattern.7.
5. Glide iron or heating tool over the surface of the card leaving a thin coating of wax in your wake. An even and smooth colored wax surface is the goal and a little practice is required to master this technique. It should feel as if the wax is pulling or peeling off the heated surface.
Experiment with using the side of the iron or heating tool to create alternate shapes and patterns in the wax surface. The only way to start encaustic painting is to try different styles and techniques until you find what works best for you.
